About this deal
The RS-4000 system uses GPS (satellites) to detect vehicle movement and speed so the sensors come on automatically when you slow down and go off again when you speed up. These have to be the easiest way to protect the front of your vehicle when parking. Description Park Safe Commercial Vehicle Parking sensor kit with wireless Control Box to Display Communication, The sensors can either be mounted into a bumper or under the bumper with the supplied underhang brackets. Specification Driver-friendly - 5 second off delay for traffic. Quick installation - simple live and earth two-wire connection. Front sensors for your car with Global Positioning System Control. No need for speed pulse, No brake connection required, No additional boxes or switches and no need for CAN Connection. Up until now, aftermarket front parking sensors have either required an expensive Can controller to sense the speed of the car and turn off the sensors after about six miles per hour (otherwise rain can set them off while driving) or a manual switch that needed to operate when moving forward at slow speed or a timer relay that would turn on the fronts for a few minutes after you selected reverse.
- 2 colour LED display with buzzer & mute function
- 3m cable length at the furthest sensor
- Sensors on between 1mph - 6mph
- Sensor mounting height: 40 ~ 60 cm
- 2m to 0.
- Detection range 1.
- Detection angle: Vertical 60° & Horizontal 120°